How To Program the Yaesu FTM-7250 using Chirp

Note: In the video I said Generic Cable. I would strongly recommend the Valley Enterprises cables as they have a true FTDI modem and the highest ratings on Amazon.

Here are the steps to program the Yaesu 7250 using Chirp.

1. Connect all cables, etc
2. Power on radio while holding down MHz/Setup button.
3. Clone Appears.
4. In Chirp: Radio/Download. Select Yaesu FTM-7250 (verify port}
5. Hit OK in Chirp.
6. Quickly hit GM/AMS button on radio
7. TX Appears. Download starts. When Finished Clone Appears.
8. Do your stuff in Chirp, when ready to upload:
9. Press MHz/Setup button on radio
10. In Chirp, hit Radio/Upload/OK. RX Appears on Radio. When upload completes, radio automatically resets and exits Clone Mode.

Note, no radio settings adjustments available, only channel settings.

Cable Used: Valley Enterprises Yaesu USB FTDI Programming Cable CT-29F (RPC-YM6-UF) MFG Product Link: https://www.valley-ent.com/store/yaesu-usb-ftdi-programming-cable-ct-29f-ft-1900r-ft-2800m-6-pin.html Amazon Link: https://amzn.to/2RSrkl4

Need Chirp? https://chirp.danplanet.com/projects/chirp/wiki/Home

Hope this helps, K4RZM

(As an Amazon Associate I earn from qualifying purchases) ... https://www.youtube.com/watch?v=2s9XbZHHxFI