How to Net Install Mikrotik 411ah

To perform a net install of MikroTik RouterOS on a MikroTik RB411AH router, follow these steps:

Before you begin Before starting the net install process, make sure you have the following:

1. A working TFTP (Trivial File Transfer Protocol) server on your network.
2. The latest version of MikroTik RouterOS for your RB411AH router. You can download it from the MikroTik website.

Step 1: Prepare the TFTP server

1. Install and configure a TFTP server on your computer or server in the same network as the RB411AH router.
2. Place the downloaded RouterOS installation package in the TFTP server's directory, usually named tftpboot.

Step 2: Connect the RB411AH to the network

1. Connect the RB411AH router to your network using an Ethernet cable.
2. Power on the router and wait for it to complete the boot process.

Step 3: Enter the boot menu

1. Connect to the RB411AH router using a serial cable or SSH connection.
2. As the router starts booting up, interrupt the process by pressing any key to enter the boot menu.

Step 4: Set the IP address

1. In the boot menu, select the "e" option to enter the IP settings.
2. Configure the router's IP address, subnet mask, default gateway, and DNS settings. For example:
   • IP Address: 192.168.1.2
   • Netmask: 255.255.255.0
   • Gateway: 192.168.1.1
   • DNS: 8.8.8.8

Step 5: Set the boot server

1. In the boot menu, select the "o" option to set the boot server.
2. Enter the IP address of the TFTP server where the RouterOS installation package is located. For example, if the TFTP server's IP address is 192.168.1.10:
   • Boot Server IP: 192.168.1.10
   • File Name: routeros-x.xx.x-mipsbe.npk, replace x.xx.x with the version number.

Step 6: Start the net install process

1. In the boot menu, select the "i" option to start the net install process.
2. Wait for the RB411AH router to download the RouterOS installation package from the TFTP server.
3. Once the installation is complete, the router will automatically reboot.

Step 7: Configure the RB411AH After the router reboots and starts running the newly installed RouterOS, you can configure it by accessing it through the default IP address of 192.168.88.1 with a web browser or via SSH.

That's it! You have successfully performed a net install of MikroTik RouterOS on your RB411AH router. Now, you can proceed with the configuration and customization of your MikroTik router as needed.

mikrotik tutorial networking mikrotik setup Mikrotik #netinstall mikrotik lhg 5 netinstall mikrotik sxt lite5 Netinstall mikrotik mikrotik router

Other Social Media links : http://tiktok.com/@mohdmzbdi Http://www.dailymotion.com/mohdmzbdi https://mohdmzbdi.blogspot.com ... https://www.youtube.com/watch?v=Li9wgTjO8k8